Re-Gain
This feature allows you to change the gain/trim of a channel without affecting the monitor sends / gate / dynamics.
A typical use case would be if an input is louder than during soundcheck and you need to adjust the gain but keep the monitor sound stable.
Usage
- Open the config page of the relevant channel
- Press and hold the gain knob (or right-click)
- Enable "Re Gain" from the top menu
- Adjust the gain
Adjustment
Gate and dynamics thresholds will be increased / decreased with the gain value. Sends / Faders will be adjusted in the inverted direction.
Example
| Value | Before | After |
|---|---|---|
| Gain | 0dB | 5 dB |
| Gate thr | -20dB | -15dB |
| Fader | -15dB | -20dB |
