Skip to content

User / Session settings

This page provides access to all session and user settings

Open settings

The app settings can be opened via the menu from the mixer view

Menu -> Setup -> App

App tab

General settings The first tab contains all session settings. On the left side you have different setting categories available.

You can press the ? for more details. Some special settings are explained here in more detail.

Orientation lock

If supported by the platform you can lock the orientation of the device. If not available please use the OS mechanism for locking the screen.

Autosave

When enabled automatically saves all User settings as default when leaving any settings view.

Windows

PC only

These settings allow you to configure the multi window behavior of the app.

USB Midi

Enables the USB midi stack. This should only be enabled if you're using this functionality as it consumes more battery.

Mixer category

Mixer settings Mixer settings 2 These settings are related to the mixer and channel views

Global knobs / sliders

This section configures how the knobs/sliders should behave. This setting is applied to all knobs in the app, excep sliders in a channel strip. These can be configured in the Channel Strip tap.

Popgroups

Enables a midas pro style popgroup functionality. When tapping on a channel button of a DCA/group the assigned channels will be shown in the mixer instead of opening the DCA/group. To edit an DCA/IDCA while popgroup mode is enabled press and hold the channel button.

When selecting an IDCA in popgroup mode the shown channels do not follow the currently selected sends on fader selection. Instead the assigned target mix of the IDCA will be used.

Layer channel change

When enabled, the <- and -> buttons in the channel view will follow the current layer instead of the default channel order.

Example

The option is enabled and your current layer configuration looks like this

Band
    Ch 1
    Ch 2
    Ch 3
    Ch 5
Vocal
    Ch 11
    Ch 13
    Ch 14

Opening Ch 5 and pressing the -> will change the view to Ch 11 instead of Ch 6

FX Popup

When enabled shows tap delay buttons in the mutegroup popup.

SoF list

When enabled shows a sends on fader list instead of the dropdown menu.

RTA Follow

When enabled the app will always change the RTA source to the currently opened channel. Depending on the mixer this means that the app will change the PAFL selection.

Metering category

Mixer settings In this section you can configure everything related to signal metering and RTA.

Gate/Dyn Timeline

Enables a history plot of the gate/dynamics input and gain reduction signal. timeline

Tap points

Depending on the mixer you can change the signal tap points that should be used for showing the meters. If you mixer doesn't support this feature it will not be shown in the app.