Skip to content

DiGiCo

Support for DiGiCo mixers is currently in private beta as it has some serious limitations due to the incomplete OSC API of the mixer.

Configuration

  1. On the mixer go to Setup -> External Control
  2. Enable External Control: Yes
  3. Press add device -> DiGiCo Pad
  4. Enter the IP address of the device running Mixing Station. You can leave the ports default
  5. Make sure the entry is marked as Enabled
  6. In Mixing Station enter the same ports as shown on the mixer, see screenshot below as an example

digico-config.png

Limitations

  • Only 1 client per mixer
  • No metering
  • No routing
  • No headamp control depending on the input
  • Not all channel parameters accessible